- May 14, 2021

How To Make Your Home Energy-Efficient: Key Tips

Building and constructing sustainable zero energy homes – the ultimate in energy conservation – entails some integrated measures that make use of readily available construction equipment and materials as well as simple building techniques. By taking a look at these guidelines, you can establish a better home that is both inexpensive to build and inexpensive to own.

Begin with Smart Design

All of the energy saving measures involved in Energy efficient home designs should be recognizable to architects and designers, as well as contractors and property investors. And the house should be built in such a way that contractors and suppliers can carry out these steps as cheaply as possible. Builders should request that designers pay particular attention to a number of design parameters. Detail contact between the contractor and designer would ensure that this important information do not slip through the cracks.

Make use of Solar Tempering

In the winter, using the sun to heat the home through south-facing windows reduces energy bills. In the summer, shading those very same windows reduces cooling costs. Solar tempering aims to maximize this efficient use of the sun’s heat while avoiding the extra cost of heat capacity needed for full passive solar heating. Solar tempering should be considered throughout the design process.

Enhance Using Energy Modelling

The energy usage of the household should be measured using energy analysis tools during the design process to ensure that the target of nearly zero energy can be met while keeping costs low. Based on the findings, design decisions may be taken or changed in order to balance building efficiency and construction costs.

Enclose the Construction Envelope Tightly

The single most cost-friendly action builders can take to increase the energy competence of a zero-energy home is super-sealing the building envelope. There is many tried-and-true air-sealing methods available. Select an approach that is appropriate for your environment, expertise, and budget.

Insulate the Building Envelope to the Full

Following airtightness, super insulating the house can be the second most cost-effective method for building a zero-energy home. As previously mentioned, energy modelling will assist you in enhancing the padding levels for the roof, wall, and floors. Choose framing techniques that will make it easier to enclose the building envelope and reduce heat transfer.

Create a Clean, Energy-Efficient Airflow

Since energy efficient homes are so airtight, a constant supply of fresh purified moisture and air control are essential to their success. This requirement for airflow has a positive side effect: zero energy houses are healthier and more comfortable than normal homes. High-efficiency ventilation systems, also known as energy recovery ventilation (ERV) or heat recovery ventilation (HRV), remove stale air while restoring its heat and restoring it to the home with the fresh air.

Install Energy-Saving Lighting

A key aspect of zero energy homes is reducing energy usage for lighting while maximizing illumination for occupants. LED lights are an excellent option for these applications. They use less energy than CFLs, last much longer, and have no mercury.

Furthermore, they can meet a wide range of lighting requirements, from very bright white light to gentle, warm light. Choosing the best LED lights for the job, strategically placing lights, and using natural light as much as possible can all help to greatly reduce a home’s energy consumption.

Leave a Reply

Your email address will not be published. Required fields are marked *