By Gaylord Pierce - July 1, 2021
Buffing Pads 101: A Quick Guide
You should become acquainted with buffing pads if you wish to regain the gloss to your clear coat and any other lustrous surface. These small spherical wonders demonstrate the importance of working smart, not hard.
What is a Polishing Pad?
Buffing pads are round polishing pads that are used to clean coats and other hard surfaces. They are also useful for applying sealants, wax, and other finishes. Most pads are constructed of fluff, but they can also be produced of wool, microfiber or a combination.
What Would I Need to Mount My Polisher’s Buffing Pad?
The Backing Plate is what holds buffing pad to polishers. This is a silicone or rubber disk with a thread nook on one side (to fit onto or into the spindles of your polisher) and a loop and hook (Velcro) face on the other (to stick your pads).
Rotary buffers use a supporting plate with a female threaded nook to thread onto your device, whereas DA polishers use a supporting plate with a male threaded arbour to thread into your polisher.
Buffing Pads: How Are They Made?
The majority of buffing sets are constructed of 2 materials that are bonded together. The major material is usually foam, which holds the polish and makes contact with the coat. The second substance is the supporting material (typically loop and hook, often known as Velcro) that enables it to attach to the polisher’s backing plate while remaining easily removable. Wool or Microfiber pads are frequently attached to the core of the foam, which will then be glued to a Velcro support.
Foam polishing pads are typically comprised of either closed or open cell foam. To put it simply, sealed cell foam does not soak up liquids as well as accessible cell foam. This cuts down on the quantity of polish used. You can find a great range of polishing pads online.
Buffing Pads: How Do They Operate?
Buffing pads are meant to hold abrasive material in polishes at the pad’s surface. After the abrasives become “attached” to the pad’s surface, they transform it into the comparable of really fine sand paper. The pad’s porous structure absorbs leftover lubricants from the polish.
Pads are also flexible, allowing them to provide consistent pressure to sharp corners. It would be quite easy to remove unequal amounts of paint and ruin your finish if the pads were not flexible.
Pads also act as a heat absorber and cool air transporters to the surface you’re working on. This is critical because abrasion is caused by friction, and friction generates heat. Heat has the potential to harm both the surface and the fabric.